Automatic Gate Repair
We diagnose sliding and swing gates that stop, reverse, drag, bind, move unevenly or stop responding altogether.
View Gate Repair ServicesEverlast Gates & Fence repairs and installs gates for homes and businesses throughout Burleson, a Johnson County suburb about 12 miles south of downtown Fort Worth along the I-35W corridor. Our team handles electric gate troubleshooting, driveway gate installation, commercial gate systems, access control, intercoms and fencing.
Everlast Gates & Fence installs and repairs gates in Burleson, TX for homes and businesses. That covers automatic gate troubleshooting, driveway gates, gate operators, commercial gate systems, access control, intercoms and fencing to match.
A gate is only as reliable as its weakest part. Hinges, rollers, tracks, chains, the operator, wiring, remotes, keypads and intercom equipment all work together, and a failure in any one of them can stop the whole entrance from functioning. We look at the full system before recommending a repair or an installation, not just the gate panel.
We diagnose sliding and swing gates that stop, reverse, drag, bind, move unevenly or stop responding altogether.
View Gate Repair ServicesMotors, control boards, batteries, wiring and receivers all get checked when an electric gate stops behaving.
Explore Electric Gate ServicesWe plan residential driveway gates around your opening width, vehicle traffic, privacy needs and available space.
Explore Driveway GatesNew sliding and swing gate systems for homes, businesses, managed properties and controlled vehicle entrances.
View Gate InstallationKeypads, remotes, intercoms, telephone entry and other compatible access-control equipment, installed or repaired.
View Access Control ServicesResidential and commercial fencing built for privacy, property separation, perimeter control and gate coordination.
View Fence ServicesA gate that's hard to move puts extra strain on the operator, and an operator that's straining can wear out a gate that was otherwise fine. That's why we check the gate structure, the moving hardware and the operator together before quoting a fix — a bad roller and a bad control board look similar from the driveway, but they call for very different repairs.
Electric gate issues usually trace back to the motor, the control board, batteries, wiring, receivers, chains or arms — or to the travel settings that tell the gate where to stop. We also check the gate itself, since a gate that binds or drags will burn out an operator no matter how many times you replace it.
Slow movement, incomplete travel, unusual sounds or repeated shutdowns usually point to the motor, operator or drive system.
Weak batteries, interrupted power, damaged wiring and loose electrical connections are common causes of unreliable operation.
Receivers, remotes, keypads, intercoms and compatible safety devices can interrupt operation when they lose communication.
A new gate installation starts with the entrance itself: opening width, driveway grade, available operating space, vehicle clearance, gate size and weight, traffic patterns, power access and how you want people to get in. Get those right and the gate you end up with fits how the property actually gets used.
A residential project can combine a driveway gate, automatic operator, entry controls and fencing into one coordinated entrance.
Commercial entrances see more traffic and more authorized users, so the equipment has to be sized for that from day one.
A driveway gate controls who pulls in and gives the front of the property a finished look at the same time. Sliding and swing gates need different amounts of clearance, so which one makes sense usually comes down to how much room you have to work with at the entrance.
A good fit when there's clearance along one side of the driveway but not enough room for a gate to swing open.
Works well on entrances with enough opening space, the right grade and a structure that can support the hardware.
Add remotes, keypads, intercoms, telephone entry or other compatible access-control equipment to either configuration.
A commercial gate has to hold up to daily traffic volume, cycle reliably, and give the right people in and visitors a straightforward way to reach whoever they're there to see. The gate operator and the access-control equipment need to work as one system, not two systems that happen to share a driveway.
Gate systems for businesses, facilities, managed properties, multifamily entrances and controlled vehicle access points.
View Commercial Gate ServicesKeypads, remotes, credential systems and other compatible entry equipment sized for how many people need access.
View Access Control ServicesIntercom and telephone entry systems that let visitors reach a tenant or staff member before the gate opens.
View Intercom SystemsWe install residential and commercial fencing for Burleson properties that need privacy, a defined property line, perimeter control, or fencing that ties directly into a gate entrance.
Privacy and property-line fencing built to line up cleanly with a driveway or pedestrian gate.
Perimeter fencing for businesses, facilities, storage areas and controlled vehicle entrances.
Planning the gate and fence together keeps posts, openings, clearances and access equipment lined up correctly.
Give us the Burleson property address, what's going on with the gate or fence, and photos if you have them.
We look at the entrance, how the gate moves, the operator, the controls and the fencing before recommending anything.
You get a proposed scope that lays out exactly what needs to happen and why, before we start any work.
Once the work is approved and finished, we test the gate movement, operator function and any entry controls.
Everlast Gates & Fence works on residential and commercial properties throughout Burleson and the surrounding Johnson County area, from established neighborhoods off Renfro Street and Wilshire Boulevard to newer construction near the I-35W corridor. Call the Burleson office for automatic gate repair, electric gate service, driveway gates, gate installation, commercial gates, access control, intercom systems or fencing.
Phone:
(817) 670-4353
Get directions to the Burleson location
Contact Everlast Gates & Fence to discuss gate repair, installation, access control or fencing.
We do. If your gate stops, reverses, drags, binds, runs intermittently or ignores the remote and keypad entirely, we can take a look and diagnose it.
Operator repairs can mean the motor, the control board, batteries, wiring, receivers, chains, arms, mounting hardware or the travel settings — the exact fix depends on what the diagnosis turns up.
We install sliding and swing driveway gates, and we can add automatic operators, remotes, keypads, intercoms and compatible access-control equipment to the project.
Often, yes. It comes down to the condition of the gate structure, hinges or rollers, whether there's room to operate an arm or slide track, and whether power is accessible nearby.
We plan commercial gate systems for businesses, facilities, managed properties, multifamily entrances and other controlled vehicle access points.
Yes — most of our gate installations pair with a compatible intercom, telephone entry, keypad or remote system, depending on how you want visitors to reach you.
We install residential and commercial fencing for privacy, property-line separation, perimeter control, and projects that need the fence to tie directly into a gate entrance.
Call the Burleson office at (817) 670-4353 or use the Everlast contact page with your property address and a description of what's going on.
Contact Everlast Gates & Fence for automatic gate repair, gate operator service, driveway gates, gate installation, commercial gates, access control, intercom systems or fencing in Burleson.
Everlast Gates & Fence